10/8 AH Slurry Pump
Capacity: 612-1368m3/h
Head: 11-61m
Speed: 400-850rpm
NPSHr: 4-10m
Eff.: 71%
Power: Max. 560kw
Handling solids: 76mm
Materials: Hyper chrome alloy, Rubber, Polyurethane, Ceramic etc
ASH Slurry Pumps Metal Parts
Main Part Number At The Drawing
032: Frame Plate 060: Intake Joint 132: Discharge Joint 083: Throatbush 110: Volute Liner 147: Impeller | 122: Stuffing Box Seal 036: Frame Plate Liner 013: Cover Plate 018: Cover Plate Liner 124: Volute Cover Seal 041: Frame Plate Liner Inser |
>>>> Metal Pump Parts For Sale
Selection Chart
Note: Approximate performance for clear water,to be used for primary selection only.
Wetted Parts:
Impellers – wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) – pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination – optional castings of straight or semi-Francis vanes (from 3 to 8 vanes on certain sizes) offer wider hydraulic options in single sizes
Liners – wide variety of metallic and elastomeric options (metal and elastomer liners are interchangeable) to select from in order to provide the longest wear life possible
Seal Arrangements:
Expeller (Centrifugal Seal) – no external sealing water required where applicable
Stuffing Box – flushed gland sealing with braided packing and a lantern ring
Mechanical Seals
Bearing Assembly:
Cartridge – style bearing housing allows for removal from pump and assembly in controlled environment
Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field
Model | Max. Power (kw) | Materials | Clear Water Performance | Impeller Vane No. | |||||
Liner | Impeller | Capacity Q (m3/h) | Head H (m) | Speed n (rpm) | Eff. η (%) | NPSH (m) | |||
1.5/1B-AH | 15 | M | M | 12.6~28.8 | 6~68 | 1200~3800 | 40 | 2~4 | 5 |
RU | RU | 10.8~25.2 | 7~52 | 1400~3400 | 35 | 3 | |||
2/1.5B-AH | 15 | M | M | 32.4~72 | 6~58 | 1200~3200 | 45 | 3.5~8 | 5 |
RU | RU | 25.2~54 | 5.5~41 | 1000~2600 | 50 | 2.5~5 | |||
3/2C-AH | 30 | M | M | 39.6~86.4 | 12~64 | 1300~2700 | 55 | 4~6 | 5 |
RU | RU | 36~75.6 | 13~39 | 1300~2100 | 60 | 2~4 | |||
4/3C-AH | 30 | M | M | 86.4~198 | 9~52 | 1000~2200 | 71 | 4~6 | 5 |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 | ||
4/3D-AH | 60 | M | M | 97.2~198 | 9~53 | 1000~2200 | 71 | 4~6 | 5 |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 | ||
6/4D-AH | 60 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 | ||
6/4E-AH | 120 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 | ||
| 8/6E-AH | 120 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 | ||
8/6R-AH | 300 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 | ||
10/8-AH | 560 | M | M | 612~1368 | 11~61 | 400~850 | 71 | 4~10 | 5 |
RU | RU | 540~1188 | 12~50 | 400~750 | 75 | 4~12 | |||
10/8E-M | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 73 | 4~10 | 5 |
RU | RU | 540~1188 | 10~42 | 500~900 | 79 | 5~9 | 5 | ||
| 12/10-AH | 560 | M | M | 936~1980 | 7~68 | 300~800 | 82 | 6 | 5 |
RU | RU | 720~1620 | 7~45 | 300~650 | 80 | 2.5~7.5 | |||
14/12-AH | 560 | M | M | 1260~2772 | 13~63 | 300~600 | 77 | 3~10 | 5 |
RU | RU | 1152~2520 | 13~44 | 300~500 | 79 | 3~8 | 5 | ||
16/14-AH | 560 | M | M | 1368~3060 | 11~63 | 250~550 | 79 | 4~10 | 5 |
16/14-AH | 1200 | ||||||||
18/16-AH | 1200 | M | M | 2160~5040 | 8~66 | 200~500 | 80 | 4.5~9 | 5 |
20/18-AH | 1200 | M | M | 2520~5400 | 13~57 | 200~400 | 85 | 5~10 | 5 |
ASH Slurry Pumps Application Fields:
1. wet crushers
2. SAG mill discharge
3. ball mill discharge
4. rod mill discharge
5. mineral processing
6. coal prep
7. cyclone feeds
8. aggregate processing
9. fine primary mill grinding
10. chemical slurry service
11. tailings
12. secondary grinding
13. industrial processing
14. pulp and paper
15. food processing
16. cracking operations
17. ash handling
