Metso Slurry Pump Metal Parts

Main Part Number At The Drawing
032:Frame Plate 060: Intake Joint 132:Discharge Joint 083:Throatbush 110:Volute Liner 147: Impeller | 122: Stuffing Box Seal 036: Frame Plate Liner 013:Cover Plate 018:Cover Plate Liner 124: Volute Cover Seal 041: Frame Plate Liner Inser |
>>>> Metal Pump Parts For Sale
Selection Chart

Note:Approximate performance for clear water,to be used for primary selection only.
1. Bearing assembly- large diameter shaft with short overhang contributes to long bearing life.
2. Liners – easily replaceable liners are bolted, not glued to the casing for positive maintenance.
3. Casing – casing halves of cast or ductile iron provide high operating pressure capabilities.
4. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
5. Throat bush – wear is reduced and maintenance simplified by the use of tapered1.
3/2 C AH Metso Slurry Pump is suitable for processing the high abrasion slurry or the material containing solid particles.
Metal smelting plant: convey slurry
Sand plant: transporting and conveying sand and gravel, feeding sand and water all types of classification and dewatering plants
Coal preparation plant: classifying, screening and conveying heavy medium, conveying coal pulp
Ceramics and glass factory: porcelain clay and sandstone transportation, feeding hydrocyclone and effluent disposal etc.
Steel works: conveying slurry, rust and corrosive liquid etc.
Irrigation systems and dredging: silt removal in dams and river bed, sand classifying
Note: please specify if applied where oil and chemicals are contained