AH Sewage Pump Metal Parts

Main Part Number At The Drawing
032: Frame Plate 060: Intake Joint 132: Discharge Joint 083: Throatbush 110: Volute Liner 147: Impeller | 122: Stuffing Box Seal 036: Frame Plate Liner 013: Cover Plate 018: Cover Plate Liner 124: Volute Cover Seal 041: Frame Plate Liner Inser |
>>>> Metal Pump Parts For Sale
Selection Chart

Note: Approximate performance for clear water,to be used for primary selection only.
1. Bearing assembly – large diameter shaft with short overhang contributes to long bearing life.
2. Liners – easily replaceable liners are bolted, not glued to the casing for positive maintenance.
3. Casing – Casing halves of cast or ductile iron provide high operating pressure capabilities.
4. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal.1.
Sewage pump 8/6E AH slurry pump application fields
1. Mining
2. Gypsum
3. Limestone
4. Mineral processing
5. FGD
6. Chemical slurries
7. Tailings
8. Lime slurries
9. Ash handing
10. Cyclone feeds
11. Waste sludge
12. Coarse sand
13. Lime mud
14. Phosphoric acid
15. Dredging
16. Construction
17. Alumina Industry
18. Power Plant
19. Potash Fertilizer Plant
20. Other industries.