Home » Blog »

Blog

  • How to increase the maximum head of a submersible pump?

    How to increase the maximum head of a submersible pump? You can increase the maximum head of a submersible pump by bolting a higher horsepower motor to the pump. The better motor choice would be a three phase motor. A VFD can then be used to drive the pump and motor above o...

    2020-07-22 Topics: Blog,Submersible Slurry Pump
  • 17 Practical Ways to Maintain the Slurry Pump

    Here are 17 tips for you to maintain slurry pump, thus prolong the service life. Keep the equipment clean, dry, free of oil and leakage. Daily check whether the oil level in the bracket is appropriate. The correct oil level is near the oil level line and should not exc...

    2020-07-21 Topics: Slurry Pumps
  • How does China build artificial islands in it’s South China Sea

    In 2015, China began pumping sand onto Mischief Reef in the Spratly Island group of the South China Sea. At that time, Its reef plate is still underwater, only the reefs around it will be exposed at low tide. But just eight months later, the Chinese built the largest island in...

    2020-03-18 Topics: Dredge Pumps
  • What is the Max Slurry Concentration of Centrifugal Slurry Pump?

    1. Common solid materials and density Table 1 Common solid materials and density Mine Power Coal Cement Others Materials ρ(t/m3) Materials ρ(t/m3) Materials ρ(t/m3) Materials ρ(t/m3) Materials ρ(t/m3) ore sand 2.5~4 ash 2~2.2 magnetite p...

    2020-03-03 Topics: Slurry Pumps
  • Relationship Between Water Pump Flow and Lift

    The pump flow and lift are important parameters for examining the performance of the pump. Correctly understanding the relationship between these parameters can help choose the most suitable pump model. What is flow, head, and power? Flow: The flow of the pump is also call...

    2020-02-21 Topics: Blog
  • Why is priming necessary in centrifugal pumps?

    Most centrifugal pumps are not self-priming. In other words, the pump casing must be filled with liquid before the pump is started, or the pump will not be able to function. If the pump casing becomes filled with vapors or gases, the pump impeller becomes gas-bound and incapab...

    2019-12-27 Topics: Centrifugal Water Pump,Blog
  • What is a centrifugal pump?

    Know the basis of Pumps A centrifugal pump is a mechanical device, which is designed to move a fluid by means of the transfer of rotational energy from one or more driven rotors, called impellers. But before knowing deeper of the centrifugal pump one must have a brief knowle...

    2019-12-24 Topics: Blog
  • What is an AH slurry pump?

    The AH Slurry Pump is a kind of horizontal centrifugal slurry pump for heavy duties application. It is suitable a range of mill duties, from dirty water to the most difficult water flushed crusher services. It is mailly used for delivering low density slurry for metallurgical,...

    2019-12-18 Topics: Blog,Slurry Pumps
  • Cause and Solution of Flow Instability of Slurry Pump

    6 causes and solutions of  slurry pump flow instability1. Suction pipe or bottom valve leakage, the water intake plug, which is a common cause of insufficient flow. We need to check the suction pipe and the bottom valve leakage source and plug-in time. Or clean up silt or bloc...

    2019-11-07 Topics: Slurry Pumps
  • Reasons and Analysis of Slurry Pump Seal Leakage

    How does the slurry pump seal leakage to do? How to solve it? First, we need to understand the effect of seal failure. Once the pump seal failure will cause the whole machine to stop working.   4 reasons and solutions of seal leakage 1. Installing Seal install...

    2019-11-09 Topics: Slurry Pumps
  • Slurry Pump Wear

    Slurry pump is a kind of centrifugal pump. In fact, the working process of the slurry pump is a process of energy transfer. In this process, the slurry pump is easily damaged. So if we want to maintain the basic slurry pump that should to solve the slurry pump wear problems. T...

    2019-11-06 Topics: Slurry Pumps
  • Applications of Heavy Duty Slurry Pumps

    Heavy Duty Slurry Pumps Heavy Duty Slurry Pumps are used to transport causticity or high hardness of solid particles for many industries. These types of pumps are widely used in mining, power, metallurgy, coal and other industries, as well as environmental protection industr...

    2019-10-25 Topics: Slurry Pumps

CONTACT US