High Pressure Slurry Pump Rubber Parts
Metal Parts
Main Part Number At The Drawing
032:Frame Plate 060: Intake Joint 132:Discharge Joint 083:Throatbush 110:Volute Liner 147: Impeller | 122: Stuffing Box Seal 036: Frame Plate Liner 013:Cover Plate 018:Cover Plate Liner 124: Volute Cover Seal 041: Frame Plate Liner Insert |
>>>> Pump Parts For Sale
Selection Chart
Note: Approximate performance for clear water,to be used for primary selection only.
1. Ductile iron fully lined casing provides durability, strength and long service life.
2. Multi-stage high pressure operation to 750 psi.
3. Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
4. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
5. Large, open internal passages designed to maximize wear life and lower operating costs.
6. Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life.
7. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
HH high head high pressure slurry pump widely used for wet crushers, SAG mill discharge, ball mill discharge, rod mill discharge, Ni acid slurry, coarse sand, coarse tailings, phosphate matrix, minerals concentrate, heavy media, dredging, bottom/fly ash, lime grinding, oil sands, mineral sands, fine tailings, phosphoric acid, coal, flotation, sugar beets, process chemical, pulp and paper, FGD, waste water etc.
1.5x1C-HH High Head Slurry Pump is widely used to transport corrosive and abrasive and high concentration slurries in mining, sand, lead and various other industries including electric utilities, copper, oil shale, agriculture, etc. 1.5x1C-HH slurry pumps are equivalent to world’s standard HH series slurry pumps.